Prof. Sadiq Thomas

Designation:

Professor

Department:

Computer Engineering

Email:

sadiqthomas@nileuniversity.edu.ng

Office:

Block A, Room 304

Biography

Dr. Sadiq Thomas is an Associate Professor and Head of Nile University of Nigeria’s Computer Engineering Department.

He received his Bachelor’s degree in Electronics and Computer Engineering at Brunel University, UK, in 2005. He also obtained a Ph.D in Electronics and Computer Engineering from the Brunel University/University of Leeds, UK in 2009.

He was with the Glamorgan University, UK as a research Assistant between 2009 and 2011. He was also a Research Fellow at the Brunel University, London, UK and Heriot Watt University, Edinburgh, UK between 2011 to 2012 and 2012 to 2013 respectively. He has over 10 years’ experience garnered from research and Lecturing in the Academics. He has published many articles in journals (indexed in ISI, SCOPUS, etc.) and conferences.

His research interests include modelling and Simulation, finite element modelling of Electromagnetic Acoustic Transducer (EMAT) sensors, etc.

He is a registered COREN Member as well as a Member of the British Institute of Non Destructive Testing (BINDT) and Institute of Engineering and Technology (IET), Institute of Electrical and Electronics Engineers (IEEE).

Recent Publications (Articles, Books, Book Chapters/Sections, Proceedings, etc.)

Thomas, P.K Woodward, O. Laghrouche, “Influence of stiffening ballasted track bed overlying a masonry arch bridge using a polyurethane polymer material”, Elsevier Construction & Building Materials Special Issue, Vol.92, pp. 111–117, September 2014.
Thomas, S.S.A. Obayya, R. Taneja, W. Balachandran, “A Coupled Electromagnetic and Mechanical Analysis of Electromagnetic Acoustic Transducers”, International Journal for Computational Methods in Engineering Science and Mechanics, Vol. 10, pp. 124-133, March 09.
DA Olawuyi, S Thomas, PO Jemitola, AG Udu, DS Nyitamen, “Methodology for Cost Estimation and Manufacturing Framework for the Modification of ABT-18 Aircraft to an Unmanned Aerial Vehicle”, Academy Journal of Science and Engineering, Vol 9, No 1, 2015.
Thomas, E.C. Ashigwuike, “Defect characterization in Ferromagnetic and non Ferromagnetic plates using an Electromagnetic Acoustic Transducer”, International Journal of Microstructure and Materials Properties, Vol 9, pp. 401- 412, May 2014.
Thomas, E.C. Ashigwuike, O. Ubadike, “Comparison of defect detection in Aluminum and Steel plates using an Electromagnetic Acoustic Transducer”, The e-Journal of Nondestructive Testing , Vol.19 No.10 – ISSN 1435-4934, Nov 2014.
C. Ashigwuike, S.Thomas, W. Balachandran, “Comparative study of KT-EMAT and SP-EMAT based on Lorentz force mechanism” , The e-Journal of Nondestructive Testing, Vol.19, No.12, – ISSN 1435-4934, Dec 2014.
C. Ashigwuike, W. Balachandran, S. Thomas, R. Mackay, “Numerical Study of EMAT Coil Structure based on Finite Element Method”, Petroleum Technology Development Journal, Vol. 1, Jan 13.
Thomas, S.S.A Obayya, E.C. Ashigwuike, W. Balachandran, ”Characterization of Defects in Non-ferromagnetic material using an Electromagnetic Acoustic Transducer”, Sensors & Transducers Journal, Vol. 151, No. 4, pp. 70-77, April 2013.
C Ashigwuike, S.Thomas, W. Balachandran, “Improving the Lorentz force Amplitude of EMAT”, Sensors and Transducers, Vol. 155, Issue 8, pp. 262-270, August 2013.
Thomas, S.S.A Obayya, D. Pinto, “Time Domain Analysis of Ultrasonic Wave Propagation using an Electromagnetic Acoustic Transducer”, Sensors & Transducers Journal, Vol. 108, Issue 9, pp. 102-115, Sept 09.
Thomas, S.S.A Obayya, D Pinto, D Dulay, W Balachandran, “Surface Defect Detection in Non ferromagnetic material using an Electromagnetic Acoustic Transducer”, Journal of Materials Science and Engineering, Vol.12, No.12, Dec 09.
AO Christopher, AA Shinkafi, FI Oyenusi, S Thomas, “Flight Performance of Abt 18 Unmanned Aerial Vehicle” Indian Journal of Engineering, Feb. Vol. 15 2018
OS Enigbe, SO Uguzo, MS Lawal, S Thomas ” Redesign of Air Bettle Aircraft Nose Landing Gear”, Indian Journal of Engineering, Vol. 15 Feb. 2018
Oluseun Oyeleke, Sadiq Thomas, Petrus Nzerem, Gokhan Koyunlu, ” Design and Construction of a Prototype Wireless Power Transfer Device” Modern Education and Computer Science Press (MECS),March 2019.
Oluseun Oyeleke Wikiman, Olabode Idowu-Bismark, Sadiq Thomas, Idris Muhammad, Femi Ilesanmi, “Performance of Massive MIMO in a Rician Fading Channel Using a ZF Precoder”, Journal of Wireless Networking and Communications 2019, 9(1): 1-7
Oluseun Oyeleke Wikiman, Olabode Idowu-Bismark, Oluwafemi Ilesanmi, Sadiq Thomas, Dyaji Charles Bala, “PIFA Antenna Design for MmWave Body Centric 5G Communication Applications”, International Journal of Electronics and Communication Engineering, Volume 6 Issue 4 – April 2019
Nyangwarimam, O. A., Mohamad R., Mohamad K. A. R., Noor A. M., Sadiq ” A Compact Second-order Chebyshev Bandpass Filter Using U-shaped Resonator and Defected Ground Structure.” Radioengineering 29, 2, pp 321-327, June 2020
Omotayo Oshiga, Sadiq Thomas and Suleiman U. Hussein, Optimal Anchor Deployment Using Tight Frames For Target Localization,”International Journal of Electrical and Computer Engineering (IJECE), Dec, 2020. Accepted
Opanweze Chioma, Godwin Aboi, Sadiq Thomas” Short Term load forecasting: A review of exponential grey smoothening, ANN and Fuzzy method” “International Journal of Science and technology (IJST) May 2020 issue”.
Okereke Vincent Onyedikachi, Akawu Bilyok Shekari, Jonathan Dangwaran, Hussein U. Suleiman, Gokhan Koyunlu, Sadiq Thomas, “Photovoltaic System Optimization Review and Approach” “World Academics Journal of Engineering Sciences 2020, Volume 7, Issue 2”.
John Nwankwo Chijioke, Sadiq Thomas “Development of an Automated Home System with Infrared Sensors” “World Academics Journal of Engineering Sciences 6, Issue.2, pp.06-11, December (2019)”
Usman Mohammed, Suleiman U. Hussein, Muhammad Usman, Sadiq Thomas. “Design of an Optimal Linear Quadratic Regulator (LQR) Controller for the Ball-On-Sphere System”, International Journal of Engineering and Manufacturing (IJEM), Vol.10, No.3, pp.56-70, 2020.

Conferences

Sadiq Thomas, Hassan Muazu, Tahir Aja Zarma, Ahmadu Galadima ” Finite Element Analysis of EMAT using Comsol Multiphysics” 13th International Conference on Electronics Computer and Computation (ICECCO), 28-29 Nov 2017
Hassan Muazu, Sadiq Thomas, “Overview of Solid State Circuit Breaker Technology and Some Recent Experiment Prototypes” 13th International Conference on Electronics Computer and Computation ICECCO, 28-29 Nov 2017
EE Evale, S Thomas, MS Lawal, GE Abbe, E C Ashigwuike, “A Novel Design Technique For The Electrical Power System Of Abt-18 Unmanned Aerial Vehicle” ,IEEE NIGERCON Owerri, Nigeria, 7-10 Nov, 2017.
OA Obikoya, S Thomas, AG Udu, IN Akpan, EC Ashigwuike, “NDT on Aircraft Composite Material”, The British Institute of Non-Destructive Testing NDT (BI-NDT) Telford UK, Sept 2017.
MS Lawal, S Thomas, C Udeagulu, AA Shinkafi, PO Jamitola, “Prediction of Aerodynamic Parameters and Pressure Distribution of the wing of Gulma UAV”, 3rd International Symposium on Engineering and Natural Science(ISEAN), Beijing, China, 12-14 August, 2015.
S Thomas ,MS Lawal, BD Joseph, AA Olosunde, “Identifying suitable NDT techniques for Air-Bettle wing and landing gear”, The British Institute of Non-Destructive Testing NDT (BI-NDT) Telford UK, Sept 2015.
S Thomas, MS Lawal, N Hassan, HO Olasehinde, ” Suitable NDT techniques for Air-Bettle fuselage and empennage”, The British Institute of Non-Destructive Testing NDT (BI-NDT) Telford UK, Sept 2015.
C. Ashigwuike, S.Thomas, W. Balachandran, “Comprehensive study of the transduction normally Biased EMATs Configuration operating on Ferromagnetic material”. The European conference on Non Destructive Testing, Oct 2014
Thomas, P.K Woodward, O. Laghrouche, “Finite Element Analysis of Masonry Arch Railway Bridges due to Polymer Stabilisation”, Oral Presentation at Imperial Railway conference, July 2013.
Thomas, P.K Woodward, O. Laghrouche, “Formation Stiffness measurement of a train-track interaction system”, Oral Presentation at Imperial Railway conference, July 2013.
Panagiotis Alevras, Daniil Yurchenko, P.K Woodward, Sadiq Thomas, , “Train Track Interaction with Variable Track Stiffness, Oral Presentation at Imperial Railway conference, July 2013
Thomas, W. Balachandran and E. Ashigwuike, “Characterization of ElectroMagnetic Acoustic Transducer using Finite Element“, The British Institute of Non-Destructive Testing NDT (BI-NDT) Northampton, Aug 2012.
C Ashigwuike, S.Thomas, W. Balachandran, “Simulation Based Comparative Study of EMAT Coil Configurations for Long Range Ultrasonic Testing”, The British Institute of Non-Destructive Testing NDT (BI-NDT) Northampton, Aug 2012.
Thomas, S.S.A Obayya, D. Dulay and W. Balachandran, “Numerical analysis of propagation effects in Electromagnetic acoustic transducer”, The British Institute of Non-Destructive Testing NDT (BI-NDT), Cheshire, UK, Sept. 2008.
Thomas, S.S.A Obayya, “Accurate Two Dimension Finite Element Time Domain for Electromagnetic Acoustic Transducer”, The International Computational Electromagnetic Time Domain (CEM-TD) Workshop, Perugia, Italy, Oct. 2007.
Tahir A. Zarma, Babagana M. Mustapha, Suleiman U. Hussein, Ahmadu A.Galadima, Sadiq Thomas “Torque Control in Brushless DC Motor Using Intelligent Linear Quadratic Regulator Controller”. ICAST 2018, Accra Ghana, Aug 2018.
Suleiman U. Hussein, Muhammed B. Mu’azu, Tahir A Aja, Ahmed T. Salawudeen, Sadiq Thomas, Ahmadu A. Galadima. Methods of Chattering Reduction in Sliding Mode Control: A Case Study of Ball and Plate System, ICAST 2018, Accra Ghana, Aug 2018.
C. Udeze, K. C. Okafor^,Sadiq Thomas, Tahir A. Zarma, Suleiman U. Hussein, Ahmadu A.Galadima, Mbah Charlse^,Reactor Full Automation in Temperature System, ICAST 2018, Accra Ghana, Aug 2018.
Sadiq Thomas, Ufuk Ozsoy, CN Udeagulu , Vitalis Anye,Petrus Nzerem, Gokhan Koyunlu. “Numerical Validation of Nondestructive Testing on Materials”, BINDT, Nottingham UK, Sept 2018
Oluseun D Oyeleke, Emmanuel Akut, Sadiq Thomas, “Study of Massive MIMO Performance in a Rich Scattering Scenario using Geometry-Based Stochastic Channel Models” accepted for presentation at the 1st National Communications Engineering Conference (NCEC2018), Ahmadu Bello University, Zaria, Nigeria
Kachalla Ibrahim, Suleiman U. Hussein Ali, Sadiq Thomas, Oluseun Oyeleke, et all TRIBAL MARK FACIAL RECOGNITION SYSTEM USING SUPERVISED LEARNING ALGORITHM, accepted for Publication at IMAC Owerri, March 2019
Thomas, E.C. Ashigwuike, O. Ubadike, “Defect detection in Ferromagnetic Aircraft part using hybrid EMAT and Eddy Current Sensor”, The British Institute of Non-Destructive Testing NDT (BI-NDT), Manchester 2014
Omotayo Oshiga, Hussein U.S, S.Thomas, P.Nzerem, L.Faruk, S.Adeshina, “Using Detection for Crowd Count Estimation Using CSI of MiFi Signals” 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Usman, E.E Oberafo, Mahdi A.A, T.Aminu, A.Modibbo, S.Thomas “Review of Interior Gateway Routing Protocols” 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Oluseun, A.N Obadiah, M.R Bin Hamid, S.Thomas, I.Orikumhi, O.Oshiga A Reconfiguration Vivaldi Antenna with bandwidth control, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
V chukwuorji, Bemdoo Saka, S.Thomas, M.U Mainta, R.Abdullahi, Olushola Akintola “Improving Power Generation in Nigeria: The Solar and Wind Energy Option”, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Edith Ahiriame Aja, S.Thomas, Oluwatomisin Aina, I.D Inuwa, B.Saka yekini Suberu Mohammed, A Fuel Cell technology approach to generate electricity using air-conditioner water, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
M Ibrahim, Steve A. Adeshina, S.Thomas, Ali N. Obadiah, Suleiman Hussein, O.E. Aina Design and Implementation of a Plastic Waste Sorting System, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Faiza Jibril, Steve A. Adeshina, S.Thomas, Ali N. Obadiah, Oiza Salau, O. E. Aina, A Microcontroller Based Heart Rate Monitoring and Conditions Detection System, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Godwin Aboi, N. O. Ali, E. K. Ukiwe, S.Thomas, O. Oshiga, Dangwaran B. Jonathan, HYDROELECTRICITY IN NIGERIA: A REVIEW OF THE ASSOCIATION ENVIRONMENTAL IMPACT, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Opanweze Chioma, S.Thomas, Suleiman U. Hussein, Godwin Aboi, O.Oshiga, Ahmed A. A. HYDRO POWER GENERATION IN NIGERIA: IMPACTS AND MITIGATION, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Bemdoo Saka, S.Thomas, Yekini Suberu Mohammed, I. D. Inuwa, Edith Ahiriame Aja, S. U. Hussein, Contingency Analysis of Abuja Transmission Network, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Onyedikachi V. Okereke, J. Dangwaran, B. A. Shekari, Fatima Asabe Aliyu, S.Thomas, H. U. Suleiman, Using Solar Photovoltaic Systems to Significantly Reduce Power Production Problems in Nigeria and Create a Geener Environment, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Sadiq Idris, Usman Mohammed, jaafaru sanusi, Sadiq Thomas, Visible Light Communication: A potential %G and beyond Communication Technology, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Yekini Suberu mohammed, D. I Inuwa, E. A. Aja, S.Thomas, Usman Umar, Smart Energy Solutions in Power Sector: Overview of the Challenges in Nigeria Perspective, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Usman Mohammed, maruf A. Aminu, S. A. Adeshina, O. Oshiga, Gokhan koyunlu, S.Thomas, Design and Implementation of Regulated DC Variable Power Supply Using Solar PV with Storage (0-15V, 5A), 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Oluseun Damilola Oyekele, S.Thomas, Idowu Bismark, Idris Muhammad, Ofodile Nkemdilim, Suleiman U. Hussein, CELL FREE MASSIVE MIMI_ENABLING TECHNOLOGY IN PROVIDING UNIFORMLY GOOD SERVICE TO USERS FOR 5G AND B5G MOBILE COMMUNICATIONS, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Sadiq M. Bammami, E.N.C Okafaro, Suleiman U. Hussein, Mohammed I. Bammami, S.Thomas, O. Oshiga, IMROVEMENT OF GRAVITY LIGHT GENERATION MODELLING USING BOND GRAPH METHOD, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Halima S. yakubu, Suleiman U. Hussein, Gokhan koyunlu, S.Thomas, Vitalis Anye, O. Oshiga, Azimuth Position Control for deep Space Antenna using Fuzzy Logic Controller, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Abdullahi O. Adegoke, Armagun Dursun, Oluseun Oyeleke, S.Thomas, Dominic Nyitamen, Energy Harvesting: Battery Less Life, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Fatima Sule Alhassan, S. Thomas, Rabiu Aminu, Z. J. Barau, O. Oyeleke, R. Abdullahi, Combined Power Plant technology: Prospects in Boosting Nigeria’s Electricity Production, 15^th International conference on Electronics Computer and Computation (ICCECO), 10-12 December 2019
Abdulhafiz Ado Ali, Jami’u Olatunji, Muhammad Tijjani Jidda, Sadiq Thomas, Abdulazeez Adeiza Abdulmalik, Nyangwarimam Obadiah Ali. “Design and Implementation of Two-way Wireless Intercom with Voice Recognition”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Jami’u Olatunji, Fatima Umar Ajiya, Abdulazeez Adeiza Abdulmalik, Abdulhafiz Ado Ali, Dr. Sadiq Thomas, Muhammad Jidda, Opeyemi Osainaye. “Automation of Power Systems for Smart Homes with Fuzzy Logic and IoT Technologies”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Fatima Umar Ajiya, Umaina M. Ibrahim, Vitalis Anye, Sadiq Thomas, Gokhhan Koyunlu, Abdulhafiz A. Ali. “Design and Implementation of An Automatic Lawnmower Robot Powered by Solar Energy”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Abdulazeez Adeiza Abdulmalik, Muhammad Jidda, Abdulhafiz Ado Ali, Jami’u Olatunji, Sadiq Thomas. “A Smart Strategy for Charging Electric Vehicles”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Muhammad Tijjani Jidda, Jamiu Olatunji, Abdulhafiz Ado Ali, Sadiq Thomas. “Design and Implementation of a Wireless Air Pollution Monitoring System”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Muhammad Tijjani Jidda, Umaina Muhammad Ibrahim, Abdulhafiz Ado Ali, Sadiq Thomas, Dr.Opeyemi Osanaiye. “A Review of the best-fit Activation Function for Cancer Diagnosis using a Neural Network”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Jami’u Olatunji, Fatima Umar Ajiya, Abdulazeez Adeiza Abdulmalik, Abdulhafiz Ado Ali, Sadiq Thomas, Muhammad Jidda, Opeyemi Osainaye. “Automation of Power Systems for Smart Homes with Fuzzy Logic and IoT Technologies”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Biliyok Akawu Shekari, Tonye Billy-Konha, Onyedikachi Vincent Okereke, Sadiq Thomas, Hussein U. Suleiman, Steve A. Adeshina. “Utilizing Wind Energy For A Low Cost, Low Technology Irrigation System” “International Conference on Electrical Engineering Application 2020 (ICEEA 2020)”. Accepted
Olushola E. Akintola, Thomas O. Ojo, Tahir Aminu, Tonye Billy Konha, Sadiq Thomas, Omotayo Oshiga “Smart Prepaid Energy Metering System to Control Electricity Theft Using AMI systems” “International Conference on Electrical Engineering Application 2020 (ICEEA2020)”.
Ezechukwu Kalu Ukiwe, Suleiman U. Hussein, Omotayo Oshiga “Linear Quadratic Gaussian (LQG) Control Design for the Ball-On-Sphere System” “Zjeet Vol.9 No. 1_2020(2) pp 29-39”. Accepted
Ezechukwu Kalu Ukiwe, Sadiq Thomas, Godwin Bioli Aboi, Omotayo Oshiga, Olushola Emmanuel Akintola, Opanweze Chioma Cynthia “SCADA: Role of Functional Supervisory Control and Data Acquisition Systems in Addressing Nigeria’s Power Grid Instability” “International Conference on Electrical Engineering Application 2020 (ICEEA2020)”.
Jonathan Dangwaran,, John Nwankwo Chijioke, Hussein U. Suleiman, Omotayo Oshiga, Nkemdilim Ofodile, Petrus Nzerem “Standardization of a Ball-on-Sphere System Using Linear Quadratic Gaussian (LQG) Regulator.” “1^st International Conference on Electrical Engineering Application (ICEEA2020) Ahmadu Bello University, Zaria, Kaduna State, Nigeria”.
Muhammad Tijjani Jidda, Abdulhafiz Ado Ali, Jami’u Olatunji, Sadiq Thomas, N Ali Obadiah. “IoT and AI Enabled Smart to Security Enhancement in Nigeria”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Tahir Aminu, Ahmad Bashir Bello, Imran Sanusi, Amira-Bilkis M. Alhassan, Mahdi Alhaji Abubakar, Sadiq Thoma. “Passive Design & Characterization Of An Energy Efficient Building”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Shuaibu Aliyu, Mustapha S. Usman, Eromosele Ehimeme Oberafo, Surajo Sani Usman. “A Review and Analysis of Performance of Wearable Antenna and Its Effects on Human Body for Military and Medical Application”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Aliyu Rufai, Lawal Musa, Fatima Aliyu, Sadiq Thomas, Gokhan Koyunlu, Suleiman U. Hussein. “Design and Implementation of a Low Frequency Circularly Polarised Cross Dipole Antenna”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Mahdi Alhaji Abubakar, Muhammad Usman, Lawal Musa, Sadiq Thomas. “Design and Implementation of 900MHz Loop Patch Antenna for Wireless Communication”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Amira-Bilkis M. Alhassan, Imran Sunusi, Maruf A Aminu, Sadiq Thomas, Steve A Adeshina,Tahir Aminu. “Design and Implementation of an IoT Based Home Automation System”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Eromosele Ehimeme Oberafo, Fatima Aliyu, Shuaibu Aliyu, Ali Nyangwarimam Obadiah, Sadiq Thomas, Oluseun Oyeleke. “A Review of Frequency Reconfigurable Antennas for Cognitive Radio Systems”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020
Godwin Bioli Aboi, Cynthia Chioma Opanweze, Sadiq Thomas, Nyangwarimam Obadiah Ali, Omotayo Oshiga, Suleiman U. Hussein. “The Need to Implement Automatic Fault Detection for Electric Power Transmission in Nigeria Using Internet of Things (IOT): A Review”, International Conference on Electrical Engineering Application (ICEEA2020), September 2020
Usman Mohammed, Aliyu Shuaibu, Ali Nyangwarimam Obadiah, Suleiman U. Hussein, Sadiq Thomas, Tahir Aminu. “A Review of the Design and Analysis of Filtenna”, 1st International Conference on Electrical Engineering Applications (ICEEA2020), September 2020

Courses/Modules Taught

Undergraduate

Introduction to Computer Engineering
Digital Electronics
Cyberpreneurship and Cyberlaw
Software Engineering
Computer Security Techniques

Postgraduate

Software Engineering
Computer Security
Seminar
Advanced Research and Development Techniques
Research Methodology